Electronic Unit Injector and Unit Pump Test Bench

UTS1004 is the all makes Unit Injector and Unit Pump Test Bench. Currently more than 1000 units actively being used in 75 different countries, prooving its wide range capability and effectiveness. More information
Technical Specifications Adjustable Cam Stroke - UTS1004 patented Cam Box design, allows to set the cam stroke without:
Draining oil
Removing cam
Adjusting timing
UTS1004 has the technical infrastructure to test
Caterpillar EUI: 3406E; C15; C10;C11;C12;C13;C18; 3116 MEUI, 3500 MEUI; 3500E.
Cummins: Celect N14/M11/M11+; HPI (ISX and QSK); K-STC;
Bosch EUI/EUP all types.
Delphi: A0; A3; E1; E3; F2P
Detroit Diesel: all types.
Continental VDO all types.
SRT Measurement
UTS1004 is capable to measure the Solenoid Response Time
Electricity Requirement 360-415 Vac 3 phase 50/60 Hz.
Electricity Requirement Transformer must be used when local supply is 200-240 3 phase 60 hz.
Electricity Requirement 100- 240 Vac 1 phase 50/60 Hz for electronics and computer.
Air Supply Min 5 bar, oil and water free @6L/min flow.
Mechanical Equipment
Main Motor 7.5 kW
Speed Control AC Drive: 100 to 1200 rpm
Cam Box Universal Profile, stroke set between 10 and 18 mm.
Test Oil Transfer System
Tank 30 L
Pump 4 L/min; gear type
Supply Pressure 0-25 bar; manually adjusted
Return Pressure 0-6 bar; manually adjusted
Test Oil Heater 2kW
Test Oil Cooler Air Cooled, with -5 °C/min with 4L/min transfer; using a seperate transfer pump
Flow/Delivery Gear Type Flowmeter; max capacity 1000 mm3/str digitally displayed as graph mm3/str vs time
SRT ±10µs accuracy with respect to real BIP, digitally displayed as graph SRT Value (µs) vs test time
Inlet Pressure 0-25 bar, digitally displayed
Return Pressure 0-6 bar, digitally displayed
Supply Temperature 10-160 °C digitally displayed
Return Temperature 10-160 °C digitally displayed
Diesel Injection Specialists™