UTS1004

More Information

Technical Specifications

UTS1004 is the all makes Unit Injector and Unit Pump Test Bench. Currently more than 1000 units actively being used in 75 different countries, prooving its wide range capability and effectiveness.

Technical Specifications

Adjustable Cam Stroke – UTS1004 patented Cam Box design, allows to set the cam stroke without:

•Draining oil
•Removing cam
•Adjusting timing

UTS1004 has the technical infrastructure to test

•Caterpillar EUI: 3406E; C15; C10;C11;C12;C13;C18; 3116 MEUI, 3500 MEUI; 3500E.
•Cummins: Celect N14/M11/M11+; HPI (ISX and QSK); K-STC;
•Bosch EUI/EUP all types.
•Delphi: A0; A3; E1; E3; F2P
•Detroit Diesel: all types.
•Continental VDO all types.

SRT Measurement

•UTS1004 is capable to measure the Solenoid Response Time

Utilities

Electricity Requirement360-415 Vac 3 phase 50/60 Hz.
Electricity RequirementTransformer must be used when local supply is 200-240 3 phase 60 hz.
Electricity Requirement100- 240 Vac 1 phase 50/60 Hz for electronics and computer.
Air SupplyMin 5 bar, oil and water free @6L/min flow.

Mechanical Equipment

Main Motor7.5 kW
Speed ControlAC Drive: 100 to 1200 rpm
Cam BoxUniversal Profile, stroke set between 10 and 18 mm.

Test Oil Transfer System

Tank30 L
Pump4 L/min; gear type
Supply Pressure0-25 bar; manually adjusted
Return Pressure0-6 bar; manually adjusted
Test Oil Heater2kW
Test Oil CoolerAir Cooled, with -5 °C/min with 4L/min transfer; using a seperate transfer pump

Instrumentation

Flow/DeliveryGear Type Flowmeter; max capacity 1000 mm3/str digitally displayed as graph mm3/str vs time
SRT±10µs accuracy with respect to real BIP, digitally displayed as graph SRT Value (µs) vs test time
Inlet Pressure0-25 bar, digitally displayed
Return Pressure0-6 bar, digitally displayed
Supply Temperature10-160 °C digitally displayed
Return Temperature10-160 °C digitally displayed